Eminent EM7385 Guida di Installazione Scaricare il pdf (Pagina 14)

ENGLISH

Usually, ‘Auto’ is the ideal setting. Only change this option to a manual setting if

you do know what the maximum amount of bits is for your television.

7.3 Setting up sound

Hint: If the HDMI Output is set to ‘Auto’, the media player will automatically use the

correct settings. When using the ‘Auto’ function, there is no need for manual settings.

7.3.1 If connected directly to your television:

1. Use the navigation buttons to go to ‘Setup’ and press the ‘OK’ button.

2. Select ‘Audio’.

3. If the media player will be used mainly during night-time, the ‘Night Mode’ can be

set to ‘ON’ or ‘Comfort’. When set to ‘On’, low-level audio content such as dialog

will be increased making it easier to hear at low volume levels. When set to

‘Comfort’, the intensity of higher-level audio content will also be reduced.

4. Make sure the ‘HDMI Output’ is set to ‘LPCM’ and press the ‘OK’ button.

5. Select ‘Surround Sound’ and press the ‘OK’ button. Select ‘5.1 CH’ or ‘Don’t care’

and press the ‘OK’ button.

7.3.2 If connected to a HDMI DTS receiver:

Refer to the manual of your HDMI receiver to make sure which codecs are supported.

The steps shown are default settings and are normally useable for a HDMI receiver.

1. Use the navigation buttons to go to ‘Setup’ and press the ‘OK’ button.

2. Select ‘Audio’.

3. If the media player will be used mainly during night-time, the ‘Night Mode’ can be

set to ‘ON’ or ‘Comfort’. When set to ‘On’, low-level audio content such as dialog

will be increased making it easier to hear at low volume levels. When set to

‘Comfort’, the intensity of higher-level audio content will also be reduced.

4. Set ‘HDMI Output’ to ‘RAW’ and press the ‘OK’ button.

5. Select ‘Surround Sound’ and press the ‘OK’ button. If your HDMI receiver

supports ‘Dolby True HD’, select ‘HD Audio’. If your HDMI receiver does not

support ‘Dolby True HD’, select ‘5.1 CH’ or ‘Don’t Care’.

7.3.3 If connected to a DTS receiver using the coaxial (EM7385 only) or optical

connection:

1. Use the navigation buttons to go to ‘Setup’ and press the ‘OK’ button.

2. Select ‘Audio’.

3. If the media player will be used mainly during night-time, the ‘Night Mode’ can be

set to ‘ON’ or ‘Comfort’. When set to ‘On’, low-level audio content such as dialog

will be increased making it easier to hear at low volume levels. When set to

‘Comfort’, the intensity of higher-level audio content will also be reduced.

4. Select ‘SPDIF Output’ and press the ‘OK’ button. Set ‘SPDIF Output’ to ‘RAW’.

5. Select ‘Surround Sound’ and press the ‘OK’ button. Select ‘5.1 CH’ or ‘Don’t

Care’ and press the ‘OK’ button.

1 2 ... 9 10 11 12 13 14 15 16 17 18 19 ... 59 60

Nessun commento

Eminent EM7385 Guida di Installazione Pagina 14