Eminent EM7385 Guida di Installazione Scaricare il pdf (Pagina 18)

18 | ENGLISH

Image 4 – USB slave/host EM7385

1. Make sure the media player is completely started.

2. Take the supplied USB 3.0 cable out of the packing.

3. Connect the USB cable to the USB 3.0 (slave) connection of the media player

(blue USB connection).

4. Connect the other side of the USB cable to a free USB (3.0) connection of your

computer.

5. Your computer will automatically recognize and install new hardware. Once the

recognition has been finished, the media player’s hard disk will be recognized by

your computer as an extra local hard disk.

6. Use the Windows explorer to browse to the hard disk. You will now be able to

copy data to the hard disk of the media player.

7. The moment you have finished copying the data, you need to safely disconnect

the USB cable from your computer or media player (Right-click the USB sign next

to the clock and click ‘Safely remove hardware’). If not, the media player will not

be able to play the copied files.

8.2 Using the network connection (Samba)

It is also possible to copy your media using the network connection. This way, there is

no need to connect your media player to your computer.

1. Use the navigation buttons to go to ‘Setup’ and press the ‘OK’ button.

2. Select ‘Network’.

3. Make sure ‘SAMBA Server’ is set to ‘On’.

4. Press the ‘Home’ button to return to the main menu.

5. Make sure your computer is started and is connected to the same network as the

media player.

6. Open the Windows Explorer and type: \\IP-Address or type the device name, in

this case: \\EM7385 and press the ‘Enter’ key on your keyboard.

7. Double-click ‘HDD’ after which the hard disk content of the media player is

shown.

8. You are now able to copy data from your computer to the hard disk of the media

player using the network connection.

1 2 ... 13 14 15 16 17 18 19 20 21 22 23 ... 64 65

Nessun commento

Eminent EM7385 Guida di Installazione Pagina 18